Usually will be shipped in 2-3 days
Worldwide Free ShippingPayment & Returns
|Quantity||3+ units||5+ units||10+ units|
|Price /Unit||US$ 15.56||US$ 15.28||US$ 15.00|
6013L type digital capacitance meter is pocket, convenient operation, accurate numerical reading, low-consumption, driven by battery, and showing numbers in a big LCD. Being accurate in measuring, it covers 9 measuring sections, a wide rang from 0.1pF to 20,00μF. It can be used in testing error testing, numerical analysis, selecting capacitance, measuring unknown capacitance, matching capacitance, and measuring the capacitance of cable, switch and printing electrocircuit.
Accuracy: ±(%reading±digits) Quality guarantee: one year
1 x Capacitance Tester
2 x Probes
Firstly, check a 9V battery whether its electric voltage is short that will show signal on the left-upper of the LCD. Secondly, pay attention to the polarity or the capacitance to be tested. Thirdly, recharge the capacitance before measuring.
1. Select proper measuring section according to the capacitance to be tested.
2. Check and use the zeroing knob on the front of the meter to adjust the value to zero before measuring.
3. Insert the black sensor into the jack with “-”signal and the red sensor into the jack with “+”.
4. Connect the capacitance to be tested with the two sensors. Pay attention to the polarity of the capacitance ! Read capacitance numerical value displayed.
a. If you don't know the approximate value of a capacitance, you should select measuring section of 200nF and then make relevant adjusting according to practical situation.
b. If the capacitance is in short circuit, the meter shows "beyond measuring range". If the capacitance is in electric leakage, the meter shows "beyond measuring range" or "much bigger than the normal value". If the capacitance is open-circuit, the meter shows "Zero" or "several pF ".
c. In testing small capacitance, directly insert the capacitance into the jack instead of using the sensors for better accuracy.
The meter is of highly accurate electronic apparatus. Don't change its internal circuit rashly for no damage to the meter.
1. Don't exert electric voltage upon the jack parts of the meter for no damage to the meter.
2. Don't test the sensors in short circuit , or the battery will be consumed out quickly.
3. Don't use a meter whose back cover doesn't cover the meter well.
4. Always replace battery and fuse after taking sensors out of a meter that is switched off. First, screw bolts in the back cover out. Second, take off the back cover. Third, replace battery and fuse according to specification provisioned in the operation manual. Suitable fuse for this meter is 200mA/250V, which external dimension is φ5×20㎜.
5. Please take out the battery when not using for a long time.
1, Please key in the correct shipping address in English while checking out with
PayPal. Or the order will be shipped to your PayPal address.
2, If your home address (habitually receiving address) has been changed, please edit your PayPal address in time to avoid editing receiving address repeatedly while checking out with PayPal.
3, Normally, dropshipping order will be shipped out in 1 business day and non-dropshipping order 2 business days.
|Item||Area||Delivery time||Delivery time|
|In Peak Season|
|Standard||United States, Canada||15-20 calendar day||25-30 calendar days|
|Australia, New Zealand, Singapore, Vietnam, Malaysia, Israel,Indonesia, Turkey||20-25 calendar days||30-35 calendar days|
|Russia, United Kingdom, France, Spain, Germany, Netherlands, Spain, Ukraine, Japan, Belgium, Denmark, Finland, Ireland, Norway, Portugal, Sweden, Switzerland||25-30 calendar days||35-40 calendar days|
|Italy, Brazil, Argentina, Chile, Mexico||30-40 calendar days||40-50 calendar days|
|Priority||United States, United Kingdom,Russia,Australia||7-15 calendar days||15-25 calendar days|
|Express||3-7 calendar days worldwide|