Usually will be shipped in 2-3 days
Worldwide Free ShippingPayment & Returns
|Quantity||3+ units||5+ units||10+ units|
|Price /Unit||US$ 12.00||US$ 11.39||US$ 11.16|
Do not use lamplight to charge the solar panel (lamplight is too weak to charge)
DC power source to replace the solar panel will cause troubles to controller.
Choose the suitable wire which diameter should not be too small, please refer to the parameter.
PWM solar charge controller PWM10-60: Compared with normal solar charge controller, this MPPT controller could increase efficiency by 10%-30%.
. This controller can charge and discharge at the same time.
. This PWM controller has perfect SOC function, control charge current, and supply power to the loads.
. Always keep the battery on fill voltage condition.
. Prevent the battery from over-charging.
. Prevent the battery from over-discharging.
. Prevent the battery from reverse charging to solar panels during nights.
. Reverse Polarity Protection for Battery
. Reverse Polarity Protection for Solar Panels
. When the battery voltage is low, the controller will automatically cut off the load from the system. If the voltage of battery is back to normal and the load will restart working.
. Thunder protection
. According to the battery voltage grade, the controller can automatically set charge-off voltage, the load-off voltage, the load- restore voltage. (The parameter is default under 25℃ condition, locked by the CPU procedure, cannot adjust.)
. The controller will automatically compensate the temperature of the charging voltage according to the changes of ambient temperature.
Before connecting to the solar panel, please connect the controller to the battery; do not use solar panel supply power to the loads directly.
Full consideration to the safety of persons and property has been given when designing the products. However the incorrect connection may cause the system breakdown or even safety accident. For your safety and benefits, the following rules must be complied during the operation.
INDICATE LIGHT AND BUTTO
When Red LED (CHARGE) is on, battery is charged up strongly; When Red LED is flickering, battery is MPPT charged up in constant voltage; when Red LED is oft charge off
. When Green LED (LOAD) is on, loads are working; when Green LED (LOAD) is off, loads stop working.
. Three Color-changing LED (BATTERY), When light is red, it indicates low voltage, green indicate battery full charged, orange indicate normal status.
Color-changing LED working voltage indicates area:
Color-changing LED: 12V , 24V
Red LED: 10.5V-11V , 21V-22V
Orange LED: 10.5～11V-13.7V , 21～22V-27.4V
Green LED: ≥13.7V , ≥ 27.4V
Rated Vo1tae: 12V / 24V
Max Load current: 10A , 15A , 20A , 30A ,40A , 5OA , 60A
Input voltage range: 12V～20V/24
Length≤1m:Charge loop drop:<250mV , <250mV , <250mV , <250mV , <250mV , <250mV , <250mV ,
Length≤1m:Discharge loop drop:<50mV , <50mV , <50mV , <50mV , <50mV , <50mV , <50mV ,
Full charge cut: 1.37V～14.4V/27.4V～28.8V/54.8V～57.6V (data under no load condition)
Low voltage cut: 10.5V～llV / 21V～24V
Temperature compensation: -3mV/℃/cell
No load loss: ≤10mV ≤10mV ≤20mV ≤20mV ≤30mV ≤40mV ≤45mV
Efficiency: 95%～97% , 95%～97% , 95%～97% , 95%～97% , 95%～97% , 95%～97% , 95%～97%
Max wire area : 2.5mm2 , 2.5mm2 , 4mm2 , 6mm2 , 8mm2 , 10mm2 , 12mm2
Ambient temperature: -25℃—55℃
Phenomenon: Green LED off, battery indicator LED is red.
Reason: Low voltage of battery
A: Cut off the power, disconnect the load; reconnect the load after the charge become normal.
B: Battery charge problem: Increase the solar panel power or change the battery.
Phenomenon: Battery indicator LED is orange and Load indicator LED is green, the loads cannot work.
Reason: Over load or short-circuit causes the controller inner fuse cut off
Solution: 10-20 minutes after eliminated the malfunction, the fuse will automatically back to working.
1xPWM Solar Charge Controller
1, Please key in the correct shipping address in English while checking out with
PayPal. Or the order will be shipped to your PayPal address.
2, If your home address (habitually receiving address) has been changed, please edit your PayPal address in time to avoid editing receiving address repeatedly while checking out with PayPal.
3, Normally, dropshipping order will be shipped out in 1 business day and non-dropshipping order 2 business days.
|Item||Area||Delivery time||Delivery time|
|In Peak Season|
|Standard||United States, Canada||15-20 calendar day||25-30 calendar days|
|Australia, New Zealand, Singapore, Vietnam, Malaysia, Israel,Indonesia, Turkey||20-25 calendar days||30-35 calendar days|
|Russia, United Kingdom, France, Spain, Germany, Netherlands, Spain, Ukraine, Japan, Belgium, Denmark, Finland, Ireland, Norway, Portugal, Sweden, Switzerland||25-30 calendar days||35-40 calendar days|
|Italy, Brazil, Argentina, Chile, Mexico||30-40 calendar days||40-50 calendar days|
|Priority||United States, United Kingdom,Russia,Australia||7-15 calendar days||15-25 calendar days|
|Express||3-7 calendar days worldwide|